0
Your Cart

High-performance 120 mm PWM Fan

 
  • Fan Speed: 200–3300 RPM
  • 0 RPMbelow 5 % PWM
  • Airflow: 81.04 cfm | 137.69 m3/h
  • Static Pressure: 4.35 mm H2O
  • Noise Level: 0.6 Sone
  • RPM-Control: Pulse Width Modulation – PWM
  • Fan Bearing: Dual Ball Bearing
  • Typical Voltage: 12 V DC
  • Start Up Voltage: 3.9 V
  • Current: 0.29 A
  • Cable Length: 400 mm
  • Connector: 4-Pin Connector
 
 
 
 

Extremely Wide Speed Range
Building up on the success of the P12 PWM, the P12 Max extends the controllable speed to an impressively wide range from 200 RPM up to 3300 RPM. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P12 Max provides a significant performance boost to existing air and water cooling solutions.
 

 

Maximum Performance – Without Compromises
The P12 Max delivers focused airflow and high static pressure, making it suitable for all scenarios. The fan is optimised for use on radiators, heat sinks, pinholes and mesh. Therefore, the P12 Max is the ideal fan for enthusiasts and professionals who are looking for maximum performance with a long service life.
 

 

0dB Mode – Zero RPM
The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Thus, the P12 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case.
 

 

Improved Stability
The P12 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise. In scenarios with high pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure.

 

 
Maximum Smoothness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. The rubber pads mounted at the corners additionally dampen the residual vibrations caused by the higher revolutions.
 

 

Designed for Continuous Operation
The premium quality of the dual ball bearing allows 24/7 continuous operation without compromising performance. Contamination and high temperatures affect this bearing much less than ordinary sleeve or ball bearings. Therefore, the dual ball bearing is the perfect choice if you want to ensure continuous operation at maximum speed. Please note that ball bearings have a physically higher bearing noise compared to conventional sleeve bearings.

 

Weight 0.22 kg
Brand

Arctic

EAN Number

4895213704076

Manufacturer Number

ACFAN00280A

Fan Connector(s)

4-pin

Installation

Mounting Screws

#Hide#LED Lighting

No

Colour

Black

Weight

184 g

Fan Dimensions

120 x 120 x 25 mm Cable Length: 400 mm

Fan Controller

PWM

Rotation Speed

200 – 3300 RPM 0 RPM below 5% PWM

Fan Bearing

Dual Ball Bearing

Air Flow

81.04 cfm

Noise level

0.6 Sone

Power

Typical Voltage: 12 V DC Start Up Voltage: 3.9 V Current: 0.29 A

Additional Features

See Overview

Package Contents

1 x P12 Max 4 x Mounting Screws

Package Type

Retail

Package Weight

0.2200 kg

Warranty

6 Years

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.